Home & Garden

Important Details When Using Ball Valves for a DIY Project

Be extra careful when using ball valves in DIY piping work. Whether you are a professional contractor on a job site or a homeowner working on a do-it-yourself project, make sure you know what supplies are needed and where to get them at a moment’s notice. Even the smallest items can determine if a product makes or breaks. One particular supply you may need to complete the job is a valve.

Types of Ball Valves

However, there are many different types of valves. One type of valve is a butterfly valve. Another type of valve is a ball valve. Now, there are also a variety of ball valves from a full bore, to a reduced bore, to a V port, and so many more. So, depending on what you need to accomplish, you need to figure out which type of valve would be best.

Say you need to figure out whether to use a butterfly valve or a ball valve. Do a comparison between the two. You will find that a butterfly valve uses an edge seal whereas a ball valve uses a face seal. The rating on a butterfly valve can reach a Class 2500 rating (42.5MPa), and a ball valves rating reaches up to Class 150 (2MPa), but rarely. Ball valves have the ability to seal two faces and be bled to determine a positive bubble-tight seal. As for a butterfly valve, it has a single seal and needs to never be assumed bubble-tight. Another difference between the two types of valves is that a butterfly valve tends to be a little heavier on the pocketbook.

Avoid Damage or Leaks

Now, if you are installing a new pipe or repairing an old, piece of equipment, you need to make sure fluid is flowing correctly to avoid any possible leaks or damage. This can be accomplished simply by installing a valve. In this case, your best choice would be that of a ball valve. Ball valves come equipped with a handle specifically designed to move the ball opening and closing a spherical port or disc. This hole in return is a gateway where the fluid in the pipe or equipment can flow as needed.

What type of Ball Valve should you use?The flow of fluid in the pipe will travel when the handle moves the ball opening the spherical disc. This happens when the disc comes in alignment with both ends of the valve. Closing of the valve occurs when the disc, or hole, is perpendicular with the valve ends. Therefore, when the ball is in place, and the hole closes, the flow stops. As for its handle, or lever, it will be in line with the positioning of the port. This allows you to see the exact location of the valve.

Ball Valve Boy Types

Another thing to consider when choosing a ball valve is that there are five specific body types: Single, split, top entry, three-piece, and welded. The primary difference among these body types is how their ball casing and other pieces have been assembled and manufactured. A ball valve’s body can be made of several different materials. It can be created using plastic, metal, or even metal with a centre made of ceramic. To keep its durability for years to come, the ball within the valve body has been plated in chrome. As for the operation in the valves, it is the same within each.
When determining which type of ball valve to use, be sure to research and find one that is not just efficient but also resilient, durable, corrosion resistant, low maintenance, and especially cost-effective. Experts worldwide have conducted many tests, and consumers have used many types of valves over the years. The steel ball valve continues to meet and exceed all these significant traits. Still, remember to research the latest and greatest valves on the market today, as with any other project supplies needed, prior to heading out or ordering online.

Final Steps

As a final note, if you are working on a do-it-yourself project, there are many sites out there providing guidance in how to get the job done from start to finish. One site you may want to consider researching is titled “Do It Yourself: How to Install a Ball Valve.” If removing a defective ball valve or starting a bathroom renovation, this site explains it all using a step-by-step approach:

Step 1 – Empty Cistern

Step 2 – Gain Access

Step 3 – Remove Existing

Step 4 – Install Replacement, and finally,

Step 5 – Test
There are many things that you need to take into consideration when starting a new project or making those final little details perfect. As a reminder, be sure to do your research and find that perfect part you seek, in this case a ball valve, or any type of valve. Once you have done your research, be sure to notate exactly what you need, comparison shop for price differences between retailers, and have fun with your project. Take your time and do it correctly. Paying special attention to the littlest of details will certainly reward you in the end.

Image credit: Flickr, bathroom plumbing /Process Systems: Ball Valves
References: 6 Advantages of Using a Steel Ball Valve / Do It Yourself: How to Install a Ball Valve
(Visited 220 times, 1 visits today)